How to inflate Bestway air mattress with built-in pump

To inflate a Bestway air mattress with a built-in pump, follow these simple steps:

  1. Find a flat, level surface: Select a flat and level area to place your air mattress. Ensure there is enough space around the mattress to allow for proper inflation and movement.
  2. Unroll the mattress: Unfold and unroll the air mattress completely, making sure there are no folds or creases.
  3. Locate the built-in pump: Find the built-in pump on the air mattress, which is usually located near the head or foot of the mattress. You should see a cord and plug attached to the pump.
  4. Plug in the pump: Connect the pump’s power cord to a nearby electrical outlet. Make sure the connection is secure.
  5. Check the inflation valve: Ensure that the inflation valve (located near the pump) is closed. If it’s open, close it by turning the valve clockwise.
  6. Turn on the pump: Switch on the built-in pump by pressing the “On” or “Inflate” button, usually located on the pump itself. The pump should start inflating the air mattress.
  7. Monitor the inflation: Keep an eye on the mattress as it inflates to ensure it reaches your desired firmness. The inflation process usually takes a few minutes, but this can vary depending on the size and thickness of the mattress.
  8. Turn off the pump: Once the air mattress has reached your desired level of firmness, switch off the pump by pressing the “Off” or “Stop” button on the pump.
  9. Secure the valve: After turning off the pump, quickly close the valve to prevent any air from escaping. Turn the valve cap clockwise until it’s tightly secured.
  10. Test the mattress: Press down on the mattress with your hands or sit on it to check if it’s firm enough for your comfort. If it needs more air, simply turn on the pump and inflate the mattress to your desired firmness.

Your Bestway air mattress with a built-in pump should now be fully inflated and ready for use. When it’s time to deflate the mattress, follow the manufacturer’s instructions, which usually involve opening the valve and turning on the pump to the “Deflate” setting.

No products found.

How to know the amount of air that our Bestway air mattress should have?

Knowing the right amount of air for your Bestway air mattress is essential for your comfort and the longevity of the mattress. While there isn’t a precise measurement, you can follow these general guidelines to find the optimal firmness:

  • Inflate the mattress: Begin by inflating the mattress using the built-in pump, as described in a previous response. Allow the mattress to fill up until it starts to take shape and appear firm.
  • Test the firmness: Gently press down on the mattress with your hand or sit on it to assess the firmness. It should be firm enough to provide support but also have some give for comfort.
  • Adjust as needed: If the mattress feels too soft, continue inflating until it reaches the desired firmness. If it’s too firm, release some air by opening the valve slightly and pressing down on the mattress to let air out. Remember to close the valve securely after each adjustment.
  • Lie down on the mattress: To ensure the mattress is comfortable for sleeping, lie down on it in your usual sleeping position. You should feel supported and comfortable, with no significant sinking or bulging.
  • Avoid over-inflation: It’s crucial not to over-inflate the mattress, as this can cause damage to the seams and material. Over-inflation occurs when the mattress is too firm and has little to no give when you press on it. If you suspect over-inflation, release some air to reduce the pressure.
  • Personal preference: Keep in mind that the optimal firmness for an air mattress is subjective and varies from person to person. You might need to experiment with different levels of inflation to find what’s most comfortable for you.

By following these guidelines, you should be able to determine the right amount of air for your Bestway inflatable mattress. Remember to recheck the firmness occasionally, as air mattresses can lose air over time and may need adjustments.

Factors and recommendations to consider when inflating our Bestway air mattress

When inflating your Bestway air mattress, there are several factors and recommendations to consider to ensure the best possible comfort and longevity of the mattress:

  • Surface area: Place the air mattress on a flat, level surface free of sharp objects or debris. This will help ensure even inflation and prevent potential punctures or damage to the mattress.
  • Room temperature: Inflate the mattress at room temperature, as extreme temperatures can affect the air inside the mattress, leading to over- or under-inflation.
  • Avoid over-inflation: Do not over-inflate the mattress, as this can cause damage to the seams and material. The mattress should be firm but still have some give when you press down on it.
  • Allow for initial stretching: New air mattresses may stretch slightly during their first use. You may need to add more air after the first few hours of use to maintain your desired firmness.
  • Weight distribution: Ensure that weight is evenly distributed across the mattress. Uneven weight distribution can cause discomfort and may affect the mattress’s durability.
  • Additional bedding: Using a mattress topper, fitted sheet, or blanket can add extra comfort and protect the air mattress from punctures or damage.
  • Follow manufacturer’s instructions: Always follow the manufacturer’s guidelines for inflating, deflating, and maintaining your air mattress. This will help ensure the best possible performance and extend the life of the mattress.